您好,欢迎来到济南新雄经贸有限公司官方网站!

400-0616-756

产品中心

PRODUCT CENTER

产品中心
当前位置: 首页-新闻中心-行业动态-利用镀锌管进行穿线的方法介绍

利用镀锌管进行穿线的方法介绍

来源:http://www.jnxxjm.com/

【 发布于:2018-08-27 16:19:53 】


1.维修方便:过线能力强,换线容易。

1. convenient maintenance: strong ability to cross the line, easy to change lines.

2.防干扰:信号屏蔽、防止强弱电之间互相干扰 。

2. anti interference: signal shielding, to prevent interference between strong and weak.

3.强度高:耐踩踏、抗冲击、防止施工刺穿线管造成短路。

3. high strength: resistance to trampling, impact resistance, and prevention of short circuit in construction.

4.省电:导热快,线路工作环境温度低,线损小、省电。

4. power saving: fast heat conduction, low working temperature of line, small line loss and electricity saving.

5.阻燃:线路发生短路阻止燃烧。

20171219787446.jpg

5. flame retardant: short circuit to prevent combustion.

6.安全:接地、漏电及时保护电器及人员安全。

6. safety: grounding, leakage, timely protection of electrical appliances and personnel safety.

7.载流量高:同等线径条件下电流通过率高,电路使用寿命长。

7. high carrying capacity: high current passing rate under the same line diameter condition and long service life of the circuit.

8.环保:可以回收再利用,避免二次污染。

8. environmental protection: it can be recycled and reused to avoid two times of pollution.

镀锌管利用:为提高钢管的耐腐蚀性能,对一般钢管进行镀锌。镀锌钢管分热镀锌和电镀锌两种,热镀锌镀锌层厚,电镀锌成本低,表面不是很光滑。吹氧焊管:用作炼钢吹氧用管,一般用小口径的焊接钢管,规格由3/8-2寸八种。用08、10、15、20或者195-Q235的钢带制作成的,为了防腐蚀,有的要进行有效渗铝处理。

Galvanized pipe utilization: to improve corrosion resistance of steel pipes, galvanized steel pipes are used. Galvanized steel pipe can be divided into hot-dip galvanizing and galvanizing. The hot-dip galvanizing layer is thick, the galvanizing cost is low, and the surface is not very smooth. Oxygen-blowing welded pipe: Used as steel-making oxygen-blowing pipe, generally with small-diameter welded pipe, specifications from 3/8-2 inch eight kinds. Made of 08, 10, 15, 20 or 195-Q235 steel strips, in order to prevent corrosion, some of the effective aluminizing treatment.



上一篇:热镀锌槽钢镀锌的特点介绍
下一篇:济南新雄镀锌管的焊接钢管的种类介绍