There will be some problems in the use of welded pipe sets. How to solve the problem of the left and right deflection of the high-frequency welded pipe machine? A variety of problems will be encountered during the operation of high frequency welded pipe unit. The problem of rolling stability of high frequency welded pipe machine is one of the common problems. The problem of rolling stability is the problem that the high frequency welded pipe machine often meets the problem of the left and right pendulum in the raceway in the operation of high frequency welded pipe machine. It is the asymmetry of the single group of rollers, the large force on the left side, and the material to the right. Swing; on the right, the force is big, and the material goes to the left.
To solve the deflection problem of welded pipe sets, we can solve them in three steps.
First, the calculation of the neutral layer in the deformation zone is accurate, the material calculation in the deformation zone is accurate, and the symmetry of the roller processing is good.
Two: do not deform the area as far as possible (such as the bottom of the slide rail), and the clearance between the upper and lower rollers during the assembly is consistent.
Three: before the material is bitten, the guiding slanting mouth should be set according to the rolling state of the front track of the high frequency welded pipe machine.
We have been the quality first, customer first, as our service tenet, we strive to provide you with satisfactory service, we sincerely welcome you to this company inspection, selection, hope that we have a good opportunity to cooperate to create a win-win situation together!