您好,欢迎来到济南新雄经贸有限公司官方网站!

400-0616-756

行业动态

Industrydynamics

产品中心
当前位置: 首页-新闻中心-行业动态-镀锌管如何抛光处理大家知道吗?

镀锌管如何抛光处理大家知道吗?

来源:http://www.jnxxjm.com

【 发布于:2020-04-11 15:21:05 】


  目前,不锈钢槽的生产厂家多采用电解抛光的方法对镀锌管表面进行抛光。重点解决方案为镀锌管抛光原理是:济南镀锌管的阳极电解抛光是工件,不溶性金属为阴极,两极沉浸到电解池,通过直流电而产生有选择性的阳极溶液中,工件表面逐渐水准,从而达到增加工件的表面亮度的影响。

  At present, the stainless steel tank manufacturers mostly use electropolishing method to polish the surface of galvanized pipe. The key solution is the polishing principle of galvanized pipe: the anode Electropolishing of Jinan galvanized pipe is the workpiece, the insoluble metal is the cathode, the two poles are immersed in the electrolytic cell, the selective anode solution is generated through direct current, the surface of the workpiece is gradually leveled, so as to achieve the effect of increasing the surface brightness of the workpiece.

  镀锌管的电抛光主要是通过正负电流和电解液的作用来改善金属表面的微观几何形状,降低金属表面的粗糙度,从而达到工件表面光洁的目的。

济南镀锌管

  Electropolishing of galvanized pipe is mainly to improve the micro geometry of metal surface and reduce the roughness of metal surface through the action of positive and negative current and electrolyte, so as to achieve the purpose of smooth surface of workpiece.

  对于电解抛光,首先,其主要特点是选择性溶解,表面波动曲线,从微观角度看是金属表面的一部分;得到的电率比凹部的电率要高,所以突出的部分会溶解,而凹部由于粘膜较多,功率低,所以处于钝化状态,不容易溶解。所以电解的初始阶段是表面处理的过程。等表面变平后再慢慢进入光的过程,这时表面的亮度就变平了

  For electropolishing, first of all, its main feature is selective dissolution, surface fluctuation curve, which is a part of the metal surface from the microscopic point of view; the obtained electric rate is higher than that of the concave part, so the protruding part will be dissolved, while the concave part is not easy to dissolve because of the large number of mucous membranes and low power. So the initial stage of electrolysis is the process of surface treatment. Wait for the surface to flatten and then slowly enter the process of light, then the brightness of the surface will flatten

  电抛光后的镀锌管具有以下优点:

  The electropolished galvanized pipe has the following advantages:

  镀锌管内外色泽一致,光泽持久,机械抛光不抛向凹处即可均匀。

  The inner and outer color of the galvanized pipe is consistent, the luster is durable, and the mechanical polishing can be even without throwing to the concave.

  因此生产镀锌管效率高,成本低。

  Therefore, the production of galvanized pipe has high efficiency and low cost.

  增加工件表面的耐腐蚀性,适用于所有镀锌管。高频电解整流采用日本进口模块,输出直流脉冲方波。电解池采用进口PP板,耐腐蚀。

  Increase the corrosion resistance of the workpiece surface, applicable to all galvanized pipes. The high frequency electrolytic rectifier adopts the module imported from Japan and outputs the DC pulse square wave. The electrolytic cell adopts imported PP plate, which is corrosion-resistant.

  以上是济南镀锌管生产厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.jnxxjm.com

  The above is the relevant content introduced by Jinan galvanized pipe manufacturer. For more information, please visit the website: http://www.jnxxjm.com



上一篇:镀锌管防腐漆膜不脱落要做什么处理
下一篇:镀锌管防腐涂料膜不脱落的因素是什么?